Article Display

Motorcycle Safety Training: what Air Force riders need to know

  • Published
  • By Arthur Albert
  • Air Force Safety Center Public Affairs

Training season for motorcyclists is just around the corner, and as training gets into full swing, it may be helpful to shed some light on the Air Force’s training requirements, review the proper acronyms for the Motorcycle Safety Foundation courses and dispel some misinformation.

In 2013, Air Force motorcycle training requirements went from a one-time requirement to a five-year requirement, intending to build on a rider’s skill level. In a nutshell, Airmen riding through 20 years of service will be required to attend at least four training courses. Each of the courses will build on the other as shown in the below chart.

Level I (Initial): New rider training will only be accomplished for those members who have a motorcycle operator’s permit from their home state and have no motorcycle endorsement.

Level II (Intermediate): Riders entering the service with an endorsement will automatically be required to attend a Level II training course within one year. If riders are unable to safely complete this training based on instructor’s recommendation, member may be directed to attend Level I training.

Sustainment/Refresher: The purpose of this training is to help riders advance their skills while reinforcing positive behavioral traits required to operate a motorcycle safely. Sustainment/Refresher training may be satisfied by participating in an approved structured mentorship course as outlined in Air Force Instruction 91-207, or repeating a Level II course.

Additional training maybe required if a rider who currently rides a cruiser-style motorcycle decides to ride a sport-bike style motorcycle. Sport bike riders will complete a Level II sport bike training course.

What do all the Motorcycle Safety Foundation acronyms mean? In 2014, the MSF updated their training curriculum. To distinguish between the new versions of the courses MSF at first placed a “U” after the acronym to specify it as an updated version of the course. In an effort to clear up confusion on the courses and provide a standardized way of interpreting which course the acronyms stand for, the following guidance is offered.

All of the older MSF courses will be shown with the year the course was replaced by an updated course (e.g. BRC 2013, BRC2 2013, ARC 2013, MSRC 2013, etc.). The “U” will be dropped from the updated courses and will be designated with just the acronym for the course, as this is the most current curriculum offered (e.g. BRC, BRC2, ARC, MSRC, etc.).

One thing to note, when it comes to BRC2 2013 and BRC2, only the newer version is approved for sport-bike related training because it concentrates on more advanced braking, maneuvering and behavior. Since the MSF completion card for BRC2 and BRC2 2013 are the same, the training location using the older curriculum will annotate the card at the top with 2013. The Air Force is encouraging all in-house training programs to switch over to the new BRC/BRC2 curriculum.

One of the most frequent miscommunications the Air Force Safety Center hears is that the Air Force is getting out of the motorcycle safety training business. This simply is not the case.

In 2017, a decision was made to focus the limited training resources available on those personnel who truly have an intention to ride a motorcycle and to also turn the requirement for obtaining a license over to the states. 

It is the state licensing programs that provide riders not only with the basic operations of a motorcycle, but provide a key element in the licensing – the laws.

The Air Force stands steadily behind training, focusing on the “Right training, right time, right bike.” Simply put, the Air Force wants to focus training not on the basic balance and control that the states are better equipped to provide, but concentrate Air Force-sponsored training more on the advanced skill sets and behavior our riders need to safely operate their own motorcycles on public streets and highways.

When you make the effort to at least obtain a learner’s permit or endorsement from your home state, proving you understand the laws associated with riding a motorcycle and illustrating your desire to ride; that’s when we step in to ensure you have the best training available to help you accomplish the task of riding safely.

For more information, email the Air Force Motorcycle Program Manager at AFSC.SEGT@us.af.mil.

For local information, call the Joint Base San Antonio-Fort Sam Houston safety office at 210-221-4576, the JBSA-Lackland safety office at 210-671-5028 or the JBSA-Randolph safety office at 210-652-1824. Other information can also be found at http://www.jbsa.mil/Resources/Safety/.